HowTo: Ubiquiti mFi mPower

Ubiquiti recently made their 3 port mFi mPower (EU plug only) available in Europe. It provides 3 plug sockets that can be controlled via WiFi using their freely downloadable mFi controller software. Setup is fairly straight forward.

mPower Initial config

In the first instance the mPower becomes an access point that you can connect your PC/Laptop or in my case my mobile phone to. The access point will have the name of mFi followed by the last 3 octets of its MAC address. There’s no encryption of password required to connect at this point.
Continue reading “HowTo: Ubiquiti mFi mPower” »